HG Bathroom Mould Spray 500ml
€7.99
€15.98/l
Description
Further DescriptionProduct and tips?
See: HG.EU
Consumer Services?
Call: +44 (0) 1279 598360
Features
Destroys the most stubborn mould
For tile grout, silicone joints, plaster etc
Result within 30 minutes
Self-acting
German Consumer Test Institute
Pack Size
500ml ℮
Ingredients
Anionic Surfactants, Chlorine-Based Bleaching Agents <5%
Safety Warning
WARNING
H315- Causes skin irritation. H319- Causes serious eye irritation. H400- Very toxic to aquatic life. EUH206- Warning! Do not use together with other products. May release dangerous gases (chlorine). P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children. P264- Wash hands thoroughly after handling. P273- Avoid release to the environment. P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313- If eye irritation persists: Get medical advice/attention.
Storage Type
Ambient
Preparation and Usage
Directions for use: Remove the locking clip before use. The product has a bleaching action. If in doubt, first test on an inconspicuous area or a discreet place. Do not remove fungi and algae before using the product. Press the nozzle at the front side and turn a quarter. Spray the surface from 3 - 5 cm distance and leave it to work for 30 minutes. In case of stubborn stains, spray again and leave to work for another 30 minutes. Clean the sprayed surface with sponge and water. Elastic grouting (for instance silicone paste) must be washed off after 30 minutes and be treated again. Turn the nozzle quarter backwards after use (blocking position). For cleaning large surfaces with green deposits, we advice HG algae mould remover.
Country
Country of Origin - Netherlands
Provenance
Made in the Netherlands
Company Name
HG (UKI) Ltd
Company Address
Weston Business Centre,
Parsonage Road,
Takeley,
Essex,
CM22 6PU.
CLP Regulation
Environment - Warning
Exclamation Point - Warning
Telephone Helpline
+44 (0) 1206 822 744
Return To
HG (UKI) Ltd,
Weston Business Centre,
Parsonage Road,
Takeley,
Essex,
CM22 6PU.
Tel.: +44 (0) 1206 822 744
Disclaimer
While we take care to ensure product information on our website is correct, products are constantly being redeveloped. As a result, ingredients, dietary, nutritional, allergen and any other information may change. You should always read the product label and not solely rely on the information provided here.
Product Number: 100873434
You may also like
Description
Further DescriptionProduct and tips?
See: HG.EU
Consumer Services?
Call: +44 (0) 1279 598360
Features
Destroys the most stubborn mould
For tile grout, silicone joints, plaster etc
Result within 30 minutes
Self-acting
German Consumer Test Institute
Pack Size
500ml ℮
Ingredients
Anionic Surfactants, Chlorine-Based Bleaching Agents <5%
Safety Warning
WARNING
H315- Causes skin irritation. H319- Causes serious eye irritation. H400- Very toxic to aquatic life. EUH206- Warning! Do not use together with other products. May release dangerous gases (chlorine). P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children. P264- Wash hands thoroughly after handling. P273- Avoid release to the environment. P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313- If eye irritation persists: Get medical advice/attention.
Storage Type
Ambient
Preparation and Usage
Directions for use: Remove the locking clip before use. The product has a bleaching action. If in doubt, first test on an inconspicuous area or a discreet place. Do not remove fungi and algae before using the product. Press the nozzle at the front side and turn a quarter. Spray the surface from 3 - 5 cm distance and leave it to work for 30 minutes. In case of stubborn stains, spray again and leave to work for another 30 minutes. Clean the sprayed surface with sponge and water. Elastic grouting (for instance silicone paste) must be washed off after 30 minutes and be treated again. Turn the nozzle quarter backwards after use (blocking position). For cleaning large surfaces with green deposits, we advice HG algae mould remover.
Country
Country of Origin - Netherlands
Provenance
Made in the Netherlands
Company Name
HG (UKI) Ltd
Company Address
Weston Business Centre,
Parsonage Road,
Takeley,
Essex,
CM22 6PU.
CLP Regulation
Environment - Warning
Exclamation Point - Warning
Telephone Helpline
+44 (0) 1206 822 744
Return To
HG (UKI) Ltd,
Weston Business Centre,
Parsonage Road,
Takeley,
Essex,
CM22 6PU.
Tel.: +44 (0) 1206 822 744
Disclaimer
While we take care to ensure product information on our website is correct, products are constantly being redeveloped. As a result, ingredients, dietary, nutritional, allergen and any other information may change. You should always read the product label and not solely rely on the information provided here.
Product Number: 100873434
You may also like
Disclaimer
While we take care to ensure product information on our website is correct, products are constantly being redeveloped. As a result, ingredients, dietary, nutritional, allergen and any other information may change. You should always read the product label and not solely rely on the information provided here.