Status 24 Hour Mechanical Timer Switch
€9.20
Description
Further DescriptionYou could save money lower your electricity bills by using a timer switch
Switching off devices at the socket and not using standby mode may help to lower your electricity bills. You could do this from the comfort of your chair using this mechanical timer switch.
Features
Energy Saving
Rotate clockwise to set current time - 15 minute segments
1 x 13 AMP Socket
13A AMP Rated
Neon Power Indicator
24 Hour mechanical timer switch
Maximum wattage: 3200W - resistive. Maximum wattage: 500W - Inductive. Maximum Current: 13Amp - resistive. Maximum current: 2Amp - inductive. Complies to EN60730, BS-5733 250V- 50Hz.
For electrical products sold within the European community.
Recycling Info
Pack - Recycle
Package Information
At the end of the electrical products useful life, it should not be disposed of with household waste
Please recycle where facilities exist
Check with your Local Authority or retailer for recycling advice
Safety Warning
Do not use in damp or wet conditions.
For indoor use only.
Storage Type
Ambient
Preparation and Usage
How to use: To set the timer to the current time, rotate the black ring clockwise until the black pointer on the timer is aligned with the time indicator on the white inner ring that corresponds to current time. Each segment equates to 15 minutes. This 24 Hour timer has an accuracy of +/- 6 minutes per day. To set the operating time of the timer, press down the black 15 minute segments required, corresponding to the required time interval 15 minutes per segment and up to 96 individual on/off settings can be made during a 24 hours period. Plug the timer in to the mains outlet and switch on. Slide the white switch on the side of the timer to the position. The timer is now active. When the current time on the timer reaches the depressed black segments, the appliance will activate. When the current time on the timer reaches the next raised black segment, the appliance will turn off. To bypass the timer settings (and activate the socket) move the side switch to the position. To reset the timer intervals, lift up all the black segments. Follow these steps again to start fresh.
Technical Specification: This mechanical segment timer is designed for the control of the on/off sequence of the item plugged into it, incorporating a sleek profile with a manual on/off button. Check the voltage and wattage of your device before use. Plug the device in to the plug before inserting in to the mains outlet. After use, pull the plug out of the mains outlet before removing the device from the plug. This adaptor does not convert voltage.
Company Name
Status International (UK) Ltd
Company Address
Unit 1,
Whitehall 26 Business Park,
Heathfield Lane,
Birkenshaw,
Bradford,
BD11 2HW.
Web Address
www.statusinternationaluk.co.uk
Return To
www.statusinternationaluk.co.uk
Status International (UK) Ltd,
Unit 1,
Whitehall 26 Business Park,
Heathfield Lane,
Birkenshaw,
Bradford,
BD11 2HW.
Disclaimer
While we take care to ensure product information on our website is correct, products are constantly being redeveloped. As a result, ingredients, dietary, nutritional, allergen and any other information may change. You should always read the product label and not solely rely on the information provided here.
Product Number: 100751198
You may also like
Description
Further DescriptionYou could save money lower your electricity bills by using a timer switch
Switching off devices at the socket and not using standby mode may help to lower your electricity bills. You could do this from the comfort of your chair using this mechanical timer switch.
Features
Energy Saving
Rotate clockwise to set current time - 15 minute segments
1 x 13 AMP Socket
13A AMP Rated
Neon Power Indicator
24 Hour mechanical timer switch
Maximum wattage: 3200W - resistive. Maximum wattage: 500W - Inductive. Maximum Current: 13Amp - resistive. Maximum current: 2Amp - inductive. Complies to EN60730, BS-5733 250V- 50Hz.
For electrical products sold within the European community.
Recycling Info
Pack - Recycle
Package Information
At the end of the electrical products useful life, it should not be disposed of with household waste
Please recycle where facilities exist
Check with your Local Authority or retailer for recycling advice
Safety Warning
Do not use in damp or wet conditions.
For indoor use only.
Storage Type
Ambient
Preparation and Usage
How to use: To set the timer to the current time, rotate the black ring clockwise until the black pointer on the timer is aligned with the time indicator on the white inner ring that corresponds to current time. Each segment equates to 15 minutes. This 24 Hour timer has an accuracy of +/- 6 minutes per day. To set the operating time of the timer, press down the black 15 minute segments required, corresponding to the required time interval 15 minutes per segment and up to 96 individual on/off settings can be made during a 24 hours period. Plug the timer in to the mains outlet and switch on. Slide the white switch on the side of the timer to the position. The timer is now active. When the current time on the timer reaches the depressed black segments, the appliance will activate. When the current time on the timer reaches the next raised black segment, the appliance will turn off. To bypass the timer settings (and activate the socket) move the side switch to the position. To reset the timer intervals, lift up all the black segments. Follow these steps again to start fresh.
Technical Specification: This mechanical segment timer is designed for the control of the on/off sequence of the item plugged into it, incorporating a sleek profile with a manual on/off button. Check the voltage and wattage of your device before use. Plug the device in to the plug before inserting in to the mains outlet. After use, pull the plug out of the mains outlet before removing the device from the plug. This adaptor does not convert voltage.
Company Name
Status International (UK) Ltd
Company Address
Unit 1,
Whitehall 26 Business Park,
Heathfield Lane,
Birkenshaw,
Bradford,
BD11 2HW.
Web Address
www.statusinternationaluk.co.uk
Return To
www.statusinternationaluk.co.uk
Status International (UK) Ltd,
Unit 1,
Whitehall 26 Business Park,
Heathfield Lane,
Birkenshaw,
Bradford,
BD11 2HW.
Disclaimer
While we take care to ensure product information on our website is correct, products are constantly being redeveloped. As a result, ingredients, dietary, nutritional, allergen and any other information may change. You should always read the product label and not solely rely on the information provided here.
Product Number: 100751198
You may also like
Disclaimer
While we take care to ensure product information on our website is correct, products are constantly being redeveloped. As a result, ingredients, dietary, nutritional, allergen and any other information may change. You should always read the product label and not solely rely on the information provided here.